Gas Monitor – 2700 Series

Detect and analyze single or multiple gases

Request Quote

The 2700 series of Kanomax Gas Monitors can be configured with a wide range of single or multi-gas sensor heads. Each sensor head is simply plugged into the detector to begin monitoring. The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.

Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb. Unit comes with a self calibration zero-out feature. The monitor is compatible with a full range of gas sensors. The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.

More Information

Navigate the tab section below to see this product’s Features & Benefits, Specifications, Resources, and more.

  • Features on-board alarm, data logging, software interface, and an analog output
  • The basic monitor will display minimum, maximum and average readings and is designed for short term indoor measurements
  • Measures a wide range of common indoor air pollutants
  • Interchangeable sensor heads capable of measuring more than 20 types of toxic gases, and one that can measure particles
  • Accurate and reliable measurements
  • Alarm and analog output available
  • Can be configured with a wide range of single or multi-gas sensor heads.
  • Each sensor head is simply plugged into the detector to begin monitoring.
  • The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.
  • Sensor heads come with a NIST TRACEABLE CALIBRATION certificate.
  • Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb.
  • Unit comes with a self calibration zero-out feature.
  • The monitor is compatible with a full range of gas sensors.
  • The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.
  • IAQ Investigation
  • Industrial Hygiene Quality Control
  • Occupational Safety and Health Testing
  • US GBC LEED certification

Main Unit Specifications
Measurement UnitsPPM or mg/m3
Sensor HeadRemovable and Replaceable
Output0 to 5 V, Alarm output
Data Logging8188 data points
Power SupplyLi-Ion Battery or AC Adapter
Dimensions (with sensor head)7.0 x 4.75 x 2.0 inches (195 x 122 x 54 mm)
Weight (with sensor and battery)1 lbs (460 g)
StandardsCE-mark
Part 15 of FCC Rules
EN 50082-1: 1997
EN 50081-1: 1992
Warranty1 year
What's IncludedMeter, Li-ion battery pack, Operation manual, AC adapter, PC connection cable*, Data processing software*

(*PC connection cable and data processing software only available for Model 2750)

Gas Monitor Sensor Heads
SensorRange (PPM)Accuracy of CalibrationMin. Detection Limit (PPM)Resolution (PPM)Operational Temperature RangeOperational RH Range
Ammonia0-100<±10%0.20.132-104°F10-90%
Ammonia (leak)0-1000<±15%2132-104°F10-90%
Carbon Monoxide0-25<±0.5 ppm 0-5 ppm;0.050.0132-104°F10-90%
<±10% 5-25 ppm
Carbon Monoxide0-100<±1 ppm 0-10 ppm;0.20.132-104°F10-90%
<±10% 10-100 ppm
Carbon Monoxide0-1000<±101132-104°F10-90%
Carbon Dioxide0-2000<±10 ppm +5%10132-104°F10-90%
Carbon Dioxide0-5000<±20 ppm +5%20132-104°F10-90%
Chlorine0-10<±10%0.020.0132-104°F10-90%
Formaldehyde0-10<±0.05 ppm 0-0.5 ppm;0.010.0132-104°F10-90%
<±10% 0.5-10 ppm
Hydrogen0-5000<±105132-104°F10-90%
Hydrogen Sulfide0-10<±0.05 ppm 0-0.5 ppm;0.040.0132-104°F10-90%
<±10% 0.5-10 ppm
Hydrogen Sulfide0-100<±0.5 ppm 0-5 ppm;0.040.0132-104°F10-90%
<±10% 5-100 ppm
Methane0-10000<±15%10132-104°F10-90%
Nitrogen Dioxide0-1<±0.02 ppm 0-0.2 ppm;0.0050.00132-104°F10-90%
<±10% 0.2-1 ppm
Ozone0-0.15<±0.005 ppm0.0010.00132-104°F10-90%
Ozone0-0.5<±0.008 ppm 0-0.1 ppm;0.0010.00132-104°F10-90%
<±10% 0.1-0.5 ppm
Ozone0-10<±0.1 ppm 0-1 ppm;0.020.0132-104°F10-90%
15% 1-10 ppm
Perchloroethylene0-200<±5 ppm 0-50 ppm;1132-104°F10-90%
<±10% 50-200 ppm
Sulphur Dioxide0-10<±0.05 ppm 0-0.5 ppm;0.040.0132-104°F10-90%
<±10% 0.5-10 ppm
Sulphur Dioxide0-100<±0.5 ppm 0-5 ppm;0.40.132-104°F10-90%
<±10% 5-100 ppm
VOC (GSS sensor)0-25<±10%0.10.132-104°F10-90%
VOC (GSS sensor)0-500<±10%1132-104°F10-90%
VOC (GSS sensor)0-20<±10%0.020.0132-104°F10-90%
VOC (GSS sensor)0-1000<±10%0.20.132-104°F10-90%
Temperature-20-100°C<± 0.3°C0.01°C-40-248°F0-105%
Humidity0 to 100%<± 2% RH1% RH-40-248°F0-105%

Gas Monitor Laser Particle Sensor Head
Sensor TypeRange (mg/m3)Accuracy of CalibrationMin. Detection Limit (mg/m3)Resolution (mg/m3)Operational Temperature RangeOperational RH Range
LPC0.001-1.000±0.005 mg/m3 +15%0.0010.0010-40°C0-90%

User Manual

Download

Data Sheet - English

Download

Data Sheet - Espanol

Download

Data Sheet - Gas Sensor Heads List

Download

Application Note - Indoor Sterilization and Purification

Download

Application Note - OZONE Monitor Pharmaceutical Applications

Download

Software

Download

  • Gas Monitor Gas Sensor Head 1 - 21 Gases
  • Gas Monitor Gas Sensor Head 2 - 4 Gases
  • Gas Monitor Mountable Industrial Enclosure: Model KM ENC CASE
  • Gas Monitor Remote Sensor Kit: Model KM R10
  • Gas Monitor AC Adapter: Model KM R18
  • Gas Monitor AC Car Adapter: Model KM R32
  • Gas Monitor Wall Bracket: Model KM R33
  • Gas Monitor Li-ion Battery: Model KM R36
  • Gas Monitor Carrying Case: Model KM R40
  • Gas Monitor Calibration Kit: Model KM R42

Kanomax Gasmaster Handheld Gas Monitor - Overview

View Video

What choose a Kanomax Gas Monitor - 2700 Series?

Our portable gas detectors are designed for easy and affordable measurement of indoor and industrial air quality.

They are used by health and safety experts at industrial and commercial sites as well as researchers who are interested in measuring hot spots and testing personal exposure to harmful indoor gases.

Our sales representatives are here to help you find the right instrument for your application. Fast.

Request a quote today to find the product you need with expert assistance.

Request a Quote Today