Home Products Services About Us Contact Us


ASHRAE 110 Diffuser Kits


Professional Fume Hood Diagnostic Tools


The Kanomax tracer gas diffuser is for use in performing the tracer gas test in accordance with ANSI/ASHRAE Standard 110-1995. The diffuser is made to the design and specifications of Standard drawing #110-83M.

The diffuser is placed in the fume hood and sulfur hexafloride gas is injected at at supply pressure of 30 psig. The internal critical orifice ensures a flow rate of 4 liters per minute. Other orifice sizes can be inserted.
Test-Manikin Tracer Gas Hardware



State-of-the-Art Technology Helps Keep Your Hood in Compliance while Enhancing Performance

All the components necessary to perform fume hood tracer gas testing in compliance with ANSI/ASHRAE Standard 110-1995. The components required include an ASHRAE ejector for the dispersed flow of Sulfur Hexafluoride into a hood complete with tank regulator and piping train, a manikin kit for breathing zone monitoring for detection of loss of containment.

Other equipment for fume hood testing includes a thermal anemometer for face velocity measurement, such as Anemomaster Model A031. Data stored in the Anemomaster can be downloaded to a datalogger from its analog output. Fume hood data can be analyzed, graphed, and recorded.


Face Velocity Measurement


Anemomaster Model A031



Specifications
 Model
Dif-Kit
 Critical Orifice
4 or 8 Liter pre Minute (4 lpm Standard)
 Regulator Dual Stage, Specialty Gas
 Flow Meter

Calibrated 150mm/200psi, Glass Tube

 Pressure Gage
Large Dial, 0 to 60psi
 Standard Accessories

Diffuser, Pressure Gauge, Shut-off Valve, In-line Flow Meter
25 ft of Tubing, Tank Regulator for Gas Cylinder

 Option Accessories

Rebuild Kit (includes new Critical Orifice, Washers, Bronze Sinter Filter)
8 lpm Swappable Ejector Base


 Model
Test-Manikin
 Standard Accessories

Lab Coat and Stand, Breathing Zone Aspirator and Tubing to Leak Meter





KANOMAX USA Copyright © 2010 KANOMAX USA, INC. All Rights Reserved.
219 US Hwy. 206, PO Box 372, Andover, NJ 07821
Tel: (973) 786-6386 / Fax: (973) 786-7586 / info@kanomax-usa.com